Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DS30 Split - Running low on Signalling Channels

Status
Not open for further replies.

adminkirk

Technical User
Sep 10, 2008
147
US
Hi all,

BCM400 4.0 here - Our DS30 split is currently set to 2/6. We're using 57/59 signalling channels and anticipate a few new employees next month.

What considerations and dangers are there when changing from 2/6 to 3/5?

Thanks!
 
if you are using bus 7 for Trunks then you will loose this bus as it is used for the extra channels.
You will only have bus 2,3,4,5,6 to play with.

the 3/5 split is ok and all programming is kept.
If you downgrade back to a 2/6 split then you lose the programming.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top