I have an SX2000 that has a P2P DS1 that fails almost every morning at switchover time(redundant planes). The PRI in the same cabinet is 100% stable. To clear, sometime I reload the card, sometimes I reset the CSU, other times both. There are two circuits on the same card, the failure is random. Sometimes one DS1 (or the other), or both - no pattern. Next step is to swap the formatter I card, but has anyone encountered anything similar? Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DS1 fails each day
- Thread starter jazwinner
- Start date
I did and my issue traced back to the CSU (SIJ in my world).
It had a bad socket for the RJ45 connection. Luckily I was able to use a DB15 instead.
Not sure if this helps.
*******************************************************
Hard work often pays off after time, but laziness always pays off now.
It had a bad socket for the RJ45 connection. Luckily I was able to use a DB15 instead.
Not sure if this helps.
*******************************************************
Hard work often pays off after time, but laziness always pays off now.
- Status
Similar threads
- Question
- Locked
- Question