Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
driver to Dual-Channel Wide-Ultra SCSI-3 Controller (pl3000)
- Thread starter ebusdk
- Start date
Hi ebusdk
If your SCSI controller is a Smart Array (Compaq)
The best solution is to :
1 - download here the SmartStart 5.5 Cdrom (it is this one I use !) :
2 - create a diskette with only one file named "spd.ini".
3 - Boot the SmartStart 5.5 Cdrom and install your Proliant 3000 with the assisted procedure.
Good luck
José - TOULOUSE - France
If your SCSI controller is a Smart Array (Compaq)
The best solution is to :
1 - download here the SmartStart 5.5 Cdrom (it is this one I use !) :
2 - create a diskette with only one file named "spd.ini".
3 - Boot the SmartStart 5.5 Cdrom and install your Proliant 3000 with the assisted procedure.
Good luck
José - TOULOUSE - France
- Status
