Driver for NAM network card

[ymeq123]

Does anyone know what driver should be used for the onboard network port in the NAM v4.0? I have set the IP address for interface 0 but when I go into the MPTS setup it only shows a parallel port driver and when I do a netstat to get the interface info it shows interface 0 as 802.5. So my parallel port is token ring and my network card it ethernet which is not installed in MPTS. I need to know which driver to select when I add the interface.

Thanks for any help.......
J

 

[ymeq123]

Never mind. I found out I needed the sis900 device driver for the card installed in the NAM. Found it out there somewhere, importetd it into MPTS, added the interface and protocol, rebooted and all is well.



J