Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

drive not ready error 1

Status
Not open for further replies.

biswajit123

Technical User
Oct 1, 2002
11
IN
hi
I am unable to boot from cdrom, it gives "drive not ready" error.

ok probe-scsi
(shows cdrom as target 2)

ok devalias
(shows cdrom path as /pci@1f,4000/scsi@3/disk@6,0:f)

ok boot /pci@1f,4000/scsi@3/disk@6,0:f -s
(still shows "drive not ready" error)

what could the problem?
pl. help.

Thanx
Biswajit
IISc
 
The problem is your alias as shown in devalias is not the correct is not configured to t target 2 but to target 6.By default on sun machines the target address for a cdrm should be 6.

You have two options:
1. You can change the target of your cdrom drive to 6.
2. boot /pci@1f,4000/scsi@3/disk@2,0:f (can vary from system to system).


Good Luck
mgrun Micha Grunberg
Unix Sys-Admin
 
hi Grunberg

Thanks lot, it helped me to boot from the CDROM.

Biswajit
IISc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top