Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Drive Latency

Status
Not open for further replies.

1ITconsultant

Technical User
May 17, 2006
24
0
0
US
Recently upgraded netbook DIMM from 1Gb to 2. Also adjusted the pagefile to 2Gb and checked MSConfig. The latency has reduced but not nearly as much as expected. Never had a solid state drive [15Gb] and so I write to inquire if any additional steps can be taken to reduce the hard drive activity
 
There are some built-in tools so that you can monitor what may be thrashing your disk. It should not be thrashing continuously once the system has settled.

As BBB says, Indexing may be party of the problem. After a fresh install of Windows, apps and data, it may take several hours for the index to finish building. If you rely on search, it may be worth waiting for it to finish. Definitely kill Defrag: it's a waste of time, resources and causes unnecessary hardware wear.

Anyway, open up the Resource Monitor and plot the disk activity to see if you can work out what is the main offender. It may just be a combination of initial indexing and initial AV scan that will stop after running to completion.


Regards: Terry
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top