drill down consolidations results in the same report window?

[renu123]

Hi!
Is it possible to drill down on elements in a consolidation , and have the drilled down values displayed in the same report window.
In case of attributes, using 'outline mode' helps(with the restriction that more than one attribute should be marked as row elements).
But, in my case, I have a consolidation, CONS whose elements look something like this:
A, B, B-A, (B-A)*100/B
My report has CONS as row element and 'time' as column element.
In this case, I want to drill down on A or B, and want the drilled down data to be displayed in the same report window and not in a new report window.
Also, in the same report window, the row arithmetic should hold good for the third and fourth consolidation elements.

 

[nlim]

In the case of con element (B-A)*100/B, what do you want the drill down elements to show?
Nick

 

[renu123]

Only, A & B should show drilled down detail data. Since, the third and fourth element (here, it is (B-A)*100/B) are results of row arithmetic, they should be the same. There is no further detail to be viewed there.
That is, as I mentioned in my previous post,
In the same report window, the row arithmetic should hold good for the third and fourth consolidation elements.
A-----|
|A1--|
|A2
B-----|
|B1--|
|B2
B-A
B-A*100/B (these resluts in the same as it is the same formula applied for detailed data)