DRG equipment and QoS parameters

[mdfan]

Hi

In DRG you define for Diffserv header the RTP/H323 or SNMP value.
This is different Diffserv setting than what is done in the IP phones and in the MD110.
What value is recommended ? And where are these values documented ; e.g. valid range etc ?

 

[fidde]

This is the same as in MD and in the phones. This is the default value in MD for ELU 32 card:
For Media: 010100|00 (Bits 0-7); Class B traffic class and medium drop precedence.
If you want the same in DRG you set the vaule to 80. IE binary 01010000 is equal to decimal 80. The accepted values are 0 - 255.

Good luck
Fredrik

 

[mdfan]

Thanks Fredrik !