Draytek LAN 2 LAN IP 500

[pridepk]

I am connected Draytek VPN lan to lan using ipsec. The connection was made successfully. After that I put Avaya IP phone 1608 on remote site. But the IP Phone 1608 is not connecting to IP500 v2.

Draytek Modem on both side

VPN Established LAN to LAN IPSEC ok

Host on both side can be pinged successfully


Main Office Network

Gateway 192.168.43.1
IP 500v2 192.168.43.230

IP Office 500 v2 Setting

License Only Essential

User and extension has been created 302

IP route has been setup on IP500 v2

Network 192.168.0.0
MASK 255.255.255.0
Gateway 192.168.43.1



*******************

Remote Office Network
Gateway 192.168.0.1

IP Phone 1608 Setting at remote Site

Phone 192.168.0.200
CallSRV 192.168.43.230
Router 192.168.0.1
Mask 255.255.255.0
FileSv 0.0.0.0

After Phone restarted and display Discovery Server. No dial tone was found on phone.


No other setting was made. Please reply

 

[amriddle01]

It's how you programmed the phone that's important

 

[intrigrant]

Add the fileserver address in the phone settings, use all available tracing tools available and do some research on the network.
Do the H.323 arrive on IP Office? Do the IP Office H.323 replies arrive om=n the phone?

Now it is asking "I have a Ford Mustang with a 3.0 litre engine and it won't start, what can be the problem?"
I am sure you have a list of things to check before calling for help which you have to pay for.

With this it is just the same, do your home work and come back if you tried everything possible and post log files and full details of what goes wrong and what you have done to find a solution.

Besides all that 'Please reply' is a demanding question, we (or maybe only me) hate that. 'I would be gratefull for any suggestions' sounds a lot better and it will make readers to respond sooner with valuable info.