lukeroberts2005
Instructor
Is there a tool or a technique that will draw a thread e.g a bolt. In 2d and 3d.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Drawing Threads
- Thread starter lukeroberts2005
- Start date
- Status
TCARPENTER
Programmer
Hi Luke,
Sort of, I haven't seen one in 2D but try this for 3D:
First thing to do is download a copy of spiral.lsp if you don't already have it. Draw the 3d sprial, then create your thread profile, v-shape, acme, square whatever, and then extrude your profile along the sprial you just created.
You may have some luck searching or
HTH
Todd
Sort of, I haven't seen one in 2D but try this for 3D:
First thing to do is download a copy of spiral.lsp if you don't already have it. Draw the 3d sprial, then create your thread profile, v-shape, acme, square whatever, and then extrude your profile along the sprial you just created.
You may have some luck searching or
HTH
Todd
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question