Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DPNSS Link

Status
Not open for further replies.

ARouby

Technical User
Mar 13, 2007
14
EG
Hi all,

Is anti-tromboning feature works between different PBX vendors in case of DPNSS signaling or it is proporatory feature (MCDN) for Nortel?

Thanks,
ARouby
 
not 100 percent on this one, but it does work qsig back to a ccm at my site.. so that would seem to deny preparatory.

john poole
bellsouth business
columbia,sc
 
That is an interesting question as Ironically I am having a bit of an issue here with a UK Mobile Link connected over DPNSS

It's with regard to Mobile dialling over this link to a set thats CallForwarded Back out over this link to another Mobile.

Now having looked at the prompts in CDB and the Route, I thought initially these prompts may have been effecting this and confirming they are set to:-

TNDM 15 (CDB)
TROMB YES (Route)

The mobile caller is ending up on the Switchboard?

When I capture the DPNSS Monitoring, its if the DPNSS signalling over this link isn't seeing or rejecting the CallForward conditions?

Any DPNSS guru's out there?

Cheers!!


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top