Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
download Image to a PC without using PXE nor Linux
- Thread starter dsit
- Start date
On your Zen server go to \\SERVER\SYS\PUBLIC\Zenworks\Imaging
In there is a Bootcd.iso file. Write this to CD, it creates a Zenworks boot CD. Then when you want to image a workstation, boot it from the CD and away you go. At the very worst if it doesn't work automatically this way you can always go into manual mode and use the commands eg img rp [zen ip address] \\server\path\image.zmg
Also you can create boot diskettes using the util:
\\SERVER\SYS\PUBLIC\Zenworks\Imaging\zimgboot.exe
Both these methods Boot from the disk into a Linux Kernel, but to don't install a Linux partition on the PC itself.
(At least not by default, I think you can play around with the settings to suit your needs)
In there is a Bootcd.iso file. Write this to CD, it creates a Zenworks boot CD. Then when you want to image a workstation, boot it from the CD and away you go. At the very worst if it doesn't work automatically this way you can always go into manual mode and use the commands eg img rp [zen ip address] \\server\path\image.zmg
Also you can create boot diskettes using the util:
\\SERVER\SYS\PUBLIC\Zenworks\Imaging\zimgboot.exe
Both these methods Boot from the disk into a Linux Kernel, but to don't install a Linux partition on the PC itself.
(At least not by default, I think you can play around with the settings to suit your needs)
- Status
Similar threads
- Locked
- Question