Downgrading a UK E-RAD to Fast-Rad

[tdmneil]

Hi,

I've done some extensive searching here and seen many threads about how to downgrade a UK e-rad to a fast-rad, there's quite a few mentions of fastrad.exe but I have been unable to find it. FirebirdScrambler seems to be the expert here, so any help would be very much appriciated! I've got a current Avaya sso login and have downloaded NRU 11, so I'm almost ready to go, but all I've got hardware wise is an original RAD which does not respond to F9** and the E-RAD asks for a password that I do not know and I can't reset it. I've just started working on Norstar again after several years away and would very much like to get NRU working,

Cheers Guys,

 

[curlycord]

RAD is nor NA systems, ERAD is for UK systems.

http://www.tek-tips.com/

If you are in the UK then stick with ERAD's.

You can run the FastRad firmware upgrade to convert ERAD to Fastrad.

As for passwords the ERAD has a higher security level using digits and letters and info on an eprom instead of a capacitor, I don't think there is a way to crack them.






=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[tdmneil]

I found the fastrad.exe on the avaya support site and downgraded all ok, but now I get - mapfile: 'AVB05ENG' is required. Any idea where I get this from?

Cheers,,

 

[Firebird Scrambler]

I'm here. I still have all the info on it. Best to contact me via my link below.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.