Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Downgrade from V10

Status
Not open for further replies.

Avalon100

Technical User
Sep 26, 2012
204
GB
Hi We are doing an 412 to IP500 V2 upgrade for a customer who has very old modules and we have checked the documentation and serial numbers and the max we can go to is V9.0. In the office we have a new IP500 and SD card but when i boot it up its on V10 software so I need to downgrade it. Can i just reformat the SD card to V9 and simply get an V9 essential license? or is there another way?
 
Yes recreate the sd card to V9.0 & get the Licence should be enough
(you may want to initially boot the IPO @v10.0 & make a call so you can go up to V10.1 when you resolve the issue with the modules

remember ip400DS V2 modules are the same as the IP500DS modules & can go to V10 +


Do things on the cheap & it will cost you dear
 
It depends on the licenses you have.
9.1 and and higher uses PLDS (9.1 can do ADI too) and 9.0 only ADI.
So if you have PLDS licenses then you cannot go lower than 9.1
Does the white modules have black or silver connectors for the phones?
Silver means a V1 model and then you can go max 9.0 but if they are black then it is a V2 model and you can use them fine on 10.X


BAZINGA!

I'm not insane, my mother had me tested!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top