double letters on terminal

[bloch309]

Help... I cannot log onto my terminal... It gives me double letters when I type. Any advise?

 

[orypecos]

Shut the terminal off for a couple of minutes, then back on. That should reset the terminal to default parameters.

Da-vi'do Juan-is'imo
P.S. For the best response to a question, read FAQ222-2244. Also give the type & version of your voice mail & pbx & preview your post to make sure it is complete & understandable. Please answer all questions so that I may have the info to assist you. Leaving a post on how you fixed the problem will also be appreciated.

 

[bloch309]

In my rush I made the situation worse. I went into the Terminal configuration (Ctrl+F1) and changed the keyboard from ASCII to scan. Now when ever I type it comes up with the wrong characters and I can no longer get into the Terminal Setup. I see a 9 Pin Serial on the back of the unit. Is there a way to Hyperterm into it and change it back?

Also as a side note this is a MAX 900 terminal connected to a Definity G3r system.

 

[nohuhu]

bloch309,

turn it off and get rid of it. then take any aged pc with serial port, connect it to g3r, install avaya site admin and have fun.

 

[bloch309]

Ended up gettign another terminal.

Thanks for the tip about Avaya site admin though...