dos FTP

[patxi]

Can anybody tell me where I can find a manual on DOS FTP errors?

frankrae@post.com

 

[GAstrada]

Not sure about your error, but here is a list of documented errors (about 1995):

DOS Error Messages

The following table provides a complete listing of DOS error numbers and
their descriptions.

DOS Errors

Error Description Error Description
Number Number

1 Invalid function number 19 Attempt to write on
write-protected diskette
2 File not found 20 Unknown unit
3 Path not found 21 Drive not ready
4 Too many open files 22 Unknown command
(no handles left)
5 Access denied 23 Data error (CRC)
6 Invalid handle 24 Bad request structure length
7 Memory control blocks 25 Seek error
destroyed
8 Insufficient memory 26 Unknown media type
9 Invalid memory block 27 Sector not found
address
10 Invalid environment 28 Printer out of paper
11 Invalid format 29 Write fault
12 Invalid access code 30 Read fault
13 Invalid data 31 General failure
14 Reserved 32 Sharing violation
15 Invalid drive was 33 Lock violation
specified
16 Attempt to remove the 34 Invalid disk change
current directory
17 Not same device 35 FCB unavailable
18 No more files 36 Sharing buffer overflow
37-49 Reserved 66 Network device type incorrect
50 Network request not 67 Network name not found
supported
51 Remote computer not 68 Network name limit exceeded
listening
52 Duplicate name on 69 Network BIOS session limit
network exceeded
53 Network name not found 70 Temporarily paused
54 Network busy 71 Network request not accepted
55 Network device no longer 72 Print or disk redirection
exists paused
56 Network BIOS command 73-79 Reserved
limit exceeded
57 Network adapter hardware 80 File already exists
error
58 Incorrect response from 81 Reserved
network
59 Unexpected network error 82 Cannot make directory entry
60 Incompatible remote 83 Fail on INT 24H
adapter
61 Print queue full 84 Too many redirections
62 Not enough space for 85 Duplicate redirection
print file
63 Print file deleted 86 Invalid password
(not enough space)
64 Network name deleted 87 Invalid parameter
65 Access denied 88 Network device fault