Door open Problem

[scorpiopy]

Hello I am having a problem with the Door open for the Lg-Nortel Ipldk-60, I do not know if the door needed for a processor that could open door, and also would like to know where he was placed in the plant so they can open door from operator
It would be very helpful because I do not have the manual and what I found on the Internet helps me not at all or not there is an explanation for that operates the ports of relay 1 and 2

 

[doktor]

Hello!
To activate the relay1 by pressing "hash" and *1.
To activate the relay2 by pressing "hash" and *2.
PGM168 also needs to be changed.
///doktor

 

[wolfi24]

you need press #*1 for door phone 1
#*2 for door phone 2
#*3 for door phone 3
#*4 for door phone 4
In PGM 107 you can change this code.
You can open the door from operator or any phone you want.



Wolfi

 

[doktor]

With some door phones of other vendors the person pressing the button on the doorphone. This makes a call to the attendant. The attendant presses #*1 to activate the relay 1 to open the door.
///doktor

 

[scorpiopy]

Thanks very much!!!

 

[doktor]

I found some more detailed information:

Relays in LG-Nortel PBX products are programmed this way:

PGM168 BTN 1 for relay 1 to 6.
Enter type:
--> 1 for LBC. Press 1 and the station number for "Loud Bell Control".
-->2 for door contact /relay (Press #*1 to #*6 to open a door).
--> 3 for external control relay no. 2.
--> 4 for external control relay no. 3.
--> 5 for external control relay no. 4.
The first (and second) relay is normally on the MPB, the rest of the relays are on other boards (e.g.MISB).
///doktor