Dongle use in STK L180 library

[R1957]

Hi,

Somebody know about the use of dongle in STK L180 library?.
Is it necesary to do an upgrade of slots?

Thanks,

 

[STKman]

The dongle enables web management. You can increase slots without it.

 

[TekAndy]

If your library is at the 1/3rd or 2/3rds capacity and you want to go to 3/3 "FULL" capactiy, all you need to do is move the hard stop on the floor of the library.

 

[R1957]

Thanks to both!!!

I´ll try again, and I´ll power off the library, (before I nly pushed reset buttom...).

Thanks, very much!!!

 

[mletendre]

there is a theata stop on the floor, unscrew it and move it to the other hole... the further around the Z-arm you move it the more slots you enable.

The dongle is for enabling the Horizon software that you can upgrade the library and do webview and other items. real nice if you use it right... i have like 3 extra dongles.