OK... Here's the deal.
I have a network with 2 VLANS and have trouble getting the clients in VLAN2 to join the domain... which is in VLAN1...
I have included the details below. HELP!!
I have a retail store with a Cisco 1760 router (ip- 10.9.1.254) handling WAN connectivity. I have a Cisco 2950 switch with 2 VLANS. VLAN1 is 10.9.1.x with a 10.9.1.254 gateway. VLAN2 is 10.9.2.x with a 10.9.2.254 gateway.
I have a LAN setup with a WIN 2003 Server running as a file server etc. It is an AD/DNS server. I am using all static IP's on the clients.
I am not doing anything fancy on the AD/DNS server. The ip of the server is 10.9.1.252.
The network card settings are as follows.
IP-10.9.1.252/255.255.255.0
Gateway-10.9.1.254 (Ip of router)
DNS-10.9.1.252 then the 2 public DNS we use - 206.141.192.55 etc.
The DNS server is not setup to do anything special. Maybe it should be.
Now... my clients in the 10.9.1.x ip range can join the domain no problem.
Client settings are as follows
VLAN1 client (joins domain just fine)
IP-10.9.1.1 / 255.255.255.0
GAteway-10.9.1.254
DNS-10.9.1.252 and then my 2 public ips in the secondary DNS spaces
VLAN2 Client
IP-10.9.2.1 / 255.255.255.0
GAteway-10.9.2.254
DNS-10.9.1.252 and then my 2 public ips in the secondary DNS spaces
BUT... I can't get the clients in the 10.9.2.x range to join the domain. They can't find the domain controller. I need to be able to have clients in both ip segemnts able to join the domain. DO I have a Gateway problem in my server configs? Or do I have a DNS issue?
If anyone can help... I would be very grateful!! I am frustrated with this thing.
Thanks a Million.
If you need more details let me know
I have a network with 2 VLANS and have trouble getting the clients in VLAN2 to join the domain... which is in VLAN1...
I have included the details below. HELP!!
I have a retail store with a Cisco 1760 router (ip- 10.9.1.254) handling WAN connectivity. I have a Cisco 2950 switch with 2 VLANS. VLAN1 is 10.9.1.x with a 10.9.1.254 gateway. VLAN2 is 10.9.2.x with a 10.9.2.254 gateway.
I have a LAN setup with a WIN 2003 Server running as a file server etc. It is an AD/DNS server. I am using all static IP's on the clients.
I am not doing anything fancy on the AD/DNS server. The ip of the server is 10.9.1.252.
The network card settings are as follows.
IP-10.9.1.252/255.255.255.0
Gateway-10.9.1.254 (Ip of router)
DNS-10.9.1.252 then the 2 public DNS we use - 206.141.192.55 etc.
The DNS server is not setup to do anything special. Maybe it should be.
Now... my clients in the 10.9.1.x ip range can join the domain no problem.
Client settings are as follows
VLAN1 client (joins domain just fine)
IP-10.9.1.1 / 255.255.255.0
GAteway-10.9.1.254
DNS-10.9.1.252 and then my 2 public ips in the secondary DNS spaces
VLAN2 Client
IP-10.9.2.1 / 255.255.255.0
GAteway-10.9.2.254
DNS-10.9.1.252 and then my 2 public ips in the secondary DNS spaces
BUT... I can't get the clients in the 10.9.2.x range to join the domain. They can't find the domain controller. I need to be able to have clients in both ip segemnts able to join the domain. DO I have a Gateway problem in my server configs? Or do I have a DNS issue?
If anyone can help... I would be very grateful!! I am frustrated with this thing.
Thanks a Million.
If you need more details let me know