Domain controller cannot be found

[matthewpaul]

A windows NT workstation is currently logged on to a windows 20000 domain and the default gateway is set as the router for the Windows 2000 domain. There is another isdn router/line which I would like to route certain applications through. To do this I have installed a second network card with a different ip address range and different gateway. This causes a problem in that the workstation now gives the message that a domain controller cannot be found. However I can now route the applications I need through the second router. However I need to be able to log on to the domain

 

[pddxr]

Try swapping the IP information on the two cards. I have seen were adding another cards has changed which card Windows uses to look for the domain controller.

 

[d3crypt4]

Yes I've seen that aswell. Also, it's worth checking that the DNS/WINS settings on the original NIC haven't changed as a result of you adding in the second set of IP settings.