Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Does VS carry PDW for c#?
- Thread starter rahmanjan
- Start date
benlinkknilneb
Programmer
Hi yamjan,
You have to add a new project to your Solution:
File, Add Project, New Project.
Then choose "Setup and Deployment Project" from the window, give it a name, and ok it. You'll then have to add some stuff into the new Setup Project; it can be as simple or as complicated as you want. Open up your help files, and search for walkthroughs about Deploying an Application... there's a couple of really good ones in there.
HTH
Ben
You have to add a new project to your Solution:
File, Add Project, New Project.
Then choose "Setup and Deployment Project" from the window, give it a name, and ok it. You'll then have to add some stuff into the new Setup Project; it can be as simple or as complicated as you want. Open up your help files, and search for walkthroughs about Deploying an Application... there's a couple of really good ones in there.
HTH
Ben
- Status
Similar threads
- Question
- Locked
- Question