Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DOES LEGEND VER. 7 WORK WITH 408 FROM MERLIN II? 1

Status
Not open for further replies.

ridel1

Programmer
Aug 12, 2003
15
US
OUR SYSTEM BOARD WAS DAMAGED DURING A STORM. IT WAS RECOMMENDED THAT WE UPGRADE TO LEGEND 7.0. SYSTEM GOES OUT AFTER CYCLE.

BOARDS IN SYSTEM 408 (NO GS/LX) JUST 408, 400, 008, 012 - NONE HAVE INITAL BEHIND.

DO I NEED 408 GS/LX BOARD?
 
The ATL boards 008, 408, 400, and the 012 will work ok in Legend 7.0. But, and there always seems to be a but, if the 008 and 408 boards are a *very* old revision level you might experience problems with unexplained clicks and line noises (we did). If you are not networking Legends, an R6/R6.1 might be good enough of an upgrade and maybe less chance of complications. Hope there is no further damage than the processor. Have you confirmed power supply is ok?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top