Does anyone have a BCM50 registered to a Nortel Signaling server?

[TelTech11]

Is anyone running phones off of a BCM50 connecting to a Nortel Signaling server? We have finally got our BCM50 to register on our Nortel Signaling Server.
However we have a few questions on some items. If you have this configuration, what are you doing to collect CDR?
What type of phones are you using on the BCM50?



PBX: Succession rls 4.50
BCM50: rls 2.0

 

[MagnaRGP]

You need IP sets that are compatible with both switches (i20XX, 1140 etc). CDR will be tracked by the PBX in normal mode.

 

[TelTech11]

We are running Norstar phones off of our BCM50. I take it you are saying the CDR will not show correctly back in the PBX for Norstars running off of a BCM50 registered to a Signaling Server?

 

[MagnaRGP]

Sorry, I assumed SRG50. CDR on the PBX only show tandem calls (calls that use a PBX PSTN line) unless you turn on CDR on the VoIP trunk route data block. I've never done that, so I don't really know what to expect on what calls will get recorded and wont.

Maybe someone else can do better.