Does 6509 support SSH input

[topdabadawg]

I have a 6509 with dual 720 sup modules. I am trying to switch input preference to SSH and it does not appear to support it. Any ideas? Here is the version I am running.

Main_Switch#sh ver
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_rp Software (c6sup2_rp-PS-M), Version 12.1(27b)E4, RELEASE SOFTW
ARE (fc3)
Technical Support:

http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Fri 29-Feb-08 12:30 by hqluong
Image text-base: 0x40008EF4, data-base: 0x41766BD0

ROM: System Bootstrap, Version 12.1(11r)E1, RELEASE SOFTWARE (fc1)
BOOTLDR: c6sup2_rp Software (c6sup2_rp-PS-M), Version 12.1(27b)E4, RELEASE SOFTW
ARE (fc3)

Main_Switch uptime is 19 weeks, 6 days, 3 hours, 24 minutes
Time since Main_Switch switched to active is 19 weeks, 6 days, 3 hours, 23 minut
es
System returned to ROM by power-on (SP by power-on)
System image file is "sup-bootflash:c6sup22-ps-mz.121-27b.e4.bin"

cisco WS-C6509 (R7000) processor (revision 3.0) with 458752K/65536K bytes of mem
ory.
Processor board ID TBA05290432
R7000 CPU at 300Mhz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
3 Virtual Ethernet/IEEE 802.3 interface(s)
100 Gigabit Ethernet/IEEE 802.3 interface(s)
381K bytes of non-volatile configuration memory.

32768K bytes of Flash internal SIMM (Sector size 512K).
Standby is up
Standby has 458752K/65536K bytes of memory.

Configuration register is 0x2102

 

[vipergg]

Your version of code does not support it. You need to get the crypto version of code to run ssh. The code name will have a "K9" somewhere in the imagename if it supports ssh .

 

[vipergg]

PS I don't think those supervisors are Sup 720's , look like old Sup2 modules .