Not sure if this is correct forum. Here is my setup..
Windows 2K DC Local site (192.168.0.229)
(192.168.0.0 mask 255.255.255.0 DFG 192.168.0.254)
RRAS on DC
DOD Interface IP (192.168.0.73)
Windows 2K DC Remote Site (192.168.10.16)
(192.168.10.0 mask 255.255.255.0 DFG 192.168.10.16)
RRAS on DC
DOD Interface IP (192.168.10.73)
I can connect successfully through the DOD interface and even ping the 192.168.0.229 DC from the 192.168.10.x network and vice versa. but I cannot ping any IP behind the domain controller on the 192.168.0.x network. or even the Firewall/Router (192.168.0.254) I would like to have internet Connectivity for the 192.168.10.0 site but I do not know how the routes should be created on the Firewall or event the DC's that are also the RRAS servers....
Windows 2K DC Local site (192.168.0.229)
(192.168.0.0 mask 255.255.255.0 DFG 192.168.0.254)
RRAS on DC
DOD Interface IP (192.168.0.73)
Windows 2K DC Remote Site (192.168.10.16)
(192.168.10.0 mask 255.255.255.0 DFG 192.168.10.16)
RRAS on DC
DOD Interface IP (192.168.10.73)
I can connect successfully through the DOD interface and even ping the 192.168.0.229 DC from the 192.168.10.x network and vice versa. but I cannot ping any IP behind the domain controller on the 192.168.0.x network. or even the Firewall/Router (192.168.0.254) I would like to have internet Connectivity for the 192.168.10.0 site but I do not know how the routes should be created on the Firewall or event the DC's that are also the RRAS servers....