Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DoD Approved VOIP / SIP Provider 1

Status
Not open for further replies.
Nov 22, 2013
600
US
Anyone know of any DoD (Department of Defence) or US government approved SIP providers. I am currently using VoIP.ms for testing some remote worker stuff and have TLS enabled over my SBC and such.

I am looking to see if there are any SIP providers like this that offer higher security standards. This is just for testing and something I am researching for potential future use.

 
Not specifically that i know of - I mean, a trunk's a trunk's a trunk.

Military hardening guides and STIGs apply to system configuration - like, is your Linux really locked down extra tight.

Presumably DoD or any security conscious customer would want a dedicated trunking service - whether that's a PRI from AT&T or an MPLS circuit from AT&T for a dedicated SIP trunk.

I mean, the ultimate goal is to get to the PSTN unencrypted - so there's only so much that can tie around that!

If its for that other UC system you were working on, you'll be sad to know you're not allowed AADS according to military hardening :p

The only feature from a VOIP perspective I can think of that would be of any value is V.150. It's like T38, but for inband modem negotiation to encrypt audio. Newer G450 DSPs have it. Just like T38 between 2 WAN separated G450s with fax machines, V.150 does the same but for that in-band negotiation. I suppose a carrier COULD support it, but I've never heard of it. As long as it's G711 through them, that's the probably where that would end. It would be too complicated for a carrier to do. They'd just tell the people who wanted to use it to make it work on G711, or, yknow, if you want to have private phone calls, don't use the PSTN.
 
Thanks for the info, this answered some of my questions. Just curious mostly.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top