documentation calls on mx-one

[miranpiscanc1]

Hi, who can tell me the command to change the IP address for print documentation outgoing calls?

Thank you

Miran

Miran Piscanc

http://www.mpcommunications.it

 

[whosrdaddy]

Sorry, can you rephrase the question?
what are "print documentation outgoing calls"?

/Daddy

-----------------------------------------------------
Helping people is my job...

 

[miranpiscanc1]

Hello,
I badly explained myself. I tried this command

callinfo_tcp_print –server

Thanks

Miran Piscanc

http://www.mpcommunications.it

 

[91064]

NAME
callinfo_tcp_print - Test program that works as TCP/IP server

SYNOPSIS
callinfo_tcp_print -server addr -port pnum

PARAMETERS
-port Port number that the server should open and listen
to.
-server Host name or IP-address for the IP-interface
the server should listen to.

DESCRIPTION
This program runs as a test server, that listens to TCP and prints
received data to standard output. This is a useful test program
for testing configurations where printable data is sent over
TCP/IP to some port.

This test server only accepts a single connection, and exits
when the client closes the connection. Control-C can be used
to interrupt/abort.

EXAMPLES
Set up a server that listens to port 9876 at the interface localhost
example% callinfo_tcp_print -server localhost -port 9876

Set up a server that listens to port 3245 at the interface 192.168.1.10
example% callinfo_tcp_print -server 192.168.1.10 -port 3245