Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
dns
- Thread starter timford
- Start date
you need to add the Ip address on your (NT) dns server to a file called /etc/resolv.conf
Its a little more complicated than that.
Lookup up resolv.conf on the SCO web site:
It should give more detail on the file syntax.
-Danny
-Danny
Its a little more complicated than that.
Lookup up resolv.conf on the SCO web site:
It should give more detail on the file syntax.
-Danny
-Danny
Nostradamus
Technical User
Try adding this to your resolv.conf
domain your.domain.here
nameserver ip-adress of the NT-server
after doing that, try pinging a host you know is inserted in the DNS-table.
I don´t know if you need any more syntaxes then that.
Try it out.
Nostradamus
domain your.domain.here
nameserver ip-adress of the NT-server
after doing that, try pinging a host you know is inserted in the DNS-table.
I don´t know if you need any more syntaxes then that.
Try it out.
Nostradamus
- Status
Similar threads
- Locked
- Question