Ok guys, I have a Domain controller running Windows Server 2003, its running AD, DNS, DHCP. I have 1 and 1 that is hosting my domain name. Is there any way to point my server to that domain so I can remote into my machine using my domain name??? I think is important to mention that on my internet service is DHCP not static IP.. Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DNS
- Thread starter ciscotx
- Start date
If you are hosting the server yourself and not letting 1and1 do it, then you'll need to use some form of dynamic DNS hosting provider, don't know if 1and1 does that also or not. A lot of routers can do the dynamic DNS updating or you can load a little client software on your server from the dynamic DNS provider to update the address to them periodically. Since you have a dynamic address, your choices are going to be limited.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question