Dnis

[Dario265]

HI,
we have defined within our dial plan public extensions with 6xxx and 7xxx when we call outside the calling party is not being sent only when we call from extensions with 7xxx. Both are going through the same trunk group.

Any idea where can be the problem or where I can take a look since the parameter send calling number within the trunk group configuration is set to yes.

thanks

 

[koglass]

I assume you have ISDN trunks. If so look in the following area. Do either a display or a change public-unknown-numbering. You should see an entry for the 7XXX but not the 6XXX. Make 6 look like 7 if it is not there.