DNIS - Changing Public received number

[Aerodesliza]

How can I change a Public received number using DN prefix, DN lenght or Code Prefix, ID lenght? I want to use that to make Tandem call between two BCM50.

 

[cook1082]

Target lines.

 

[Aerodesliza]

I can't do that in the Target Line

 

[cook1082]

You are asking to do several things. What is it your trying to do. more info.Is it call comes in 1 bsm and out to other bcm.

 

[Aerodesliza]

I want to make a Tandem call. Example. I make a National call from Site A using H323 trunk to Site B then I take a Site B's PSTN trunk. Now more explanation:

My is number: 818099601234

When I dial 81809960, I Absorb the two first digit(81) and send the DNIS to the Site B (8099601234), now my problem start here:

1)I need to send 10 digit and Private network only allow me 7 that means I have to use Public Network because it allow me 12 digit.

2) I need to add a 9 in front of my number because when the number reach the Site B the 9 will become my PoolA access then the rest of my number will be my dialed number,(8099601234). that why I ask about the Dn prefix and Code prefix.


Destination Code: 81809960
Aborsb: 2

- Remote acces package
1 = PoolA

- Lines
Remote package = 1

- Private newtwork
Private received number= 7
Private DN lenght = 10

- Routing Table
Destination digit = 81809960

Sorry for my english

 

[cook1082]

In the route there is a dial out or external number add a 9 there so when the 81 is dialed it will insert a 9 in front of the number and the other system will route it out. Also it should be a public route.

 

[Aerodesliza]

Where can I find that option to add a 9? I can't find it
I change to public recived and now I can received all the digit.

 

[Aerodesliza]

Ok I find the external number option and I added the 9, Im change the Destination digit to 9809 but now I receiving a busy tone I don't know why.

 

[Aerodesliza]

The problem was a mistake in the DN prefix field about the default lenght but now Im receiving the entire number 98099601234 and the Site B is not giving me access to Pool A, I checked the remote package 1 and is assign to Pool A and Pool is assing to remote package 1, any suggestion?

 

[madwok]

Have you check the private DN lenght ? Bump it up as tandem dialing is using private, not public .

 

[Aerodesliza]

I can't use private because doesn't allow more than 7 digit and Im using 11, right now Im receiving the entire number (98099601234) but I don't why I m can't accessing to PoolA

 

[Aerodesliza]

I change to Private now I can access to PoolA but I don't know why when the SiteB give me the trunk, it suposse to dial the DNIS but I only got a dial tone to dial the number manual, why isn't dialing automatic the DNIS?

 

[cook1082]

The other site needs a dest code of 81809960 point it at the route with pool A and remote access is for dialing in from the outside and accessing a line/trunk and dialing manualy back out put it back to public ,11 digits and it should work. The reason for the busy was no reute to go out.

 

[Aerodesliza]

cook1082 you are a genius.

Thanks