Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DNIC Paging Unit for SX2000 System 1
- Thread starter jeffgoza
- Start date
-
1
- #2
MitelInMyBlood
Technical User
If you have the original documentation that came with it then you should have all you need. Program it in the PBX (DNI assignment form) as a DMP on the first channel only.
Personally I've found it easier (faster/simpler/cheaper) on an SX2K to use an E&M trunk card for paging applications. This yields as many as 4 separate paging circuits all in one card that sits inside the PBX in literally any vacant slot in one of your peripheral bays and doesn't require a separate power cube or separate external cabling, etc. MC312 trunk cards are also a dime a dozen on the secondary market. The "how-to" is explained in the tech handbook.
Personally I've found it easier (faster/simpler/cheaper) on an SX2K to use an E&M trunk card for paging applications. This yields as many as 4 separate paging circuits all in one card that sits inside the PBX in literally any vacant slot in one of your peripheral bays and doesn't require a separate power cube or separate external cabling, etc. MC312 trunk cards are also a dime a dozen on the secondary market. The "how-to" is explained in the tech handbook.
- Status
Similar threads