Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DND (NEC Electra Professional II) 1

Status
Not open for further replies.

pabell

Technical User
Sep 5, 2002
106
US
We have a couple of Phones in DND state .....
function key flashing ...what is the FNC code
to remove ( should be the same as putting it on)
just don't have a old user guide handy ....
does anyone know of any sites/links to function codes


Thanks for any and all help
Pabell
 
Hey Pabell,
On your NEC DND problem,Uusually the same button toggles feature on and off but Im sure youve tried that.I didnt see what NEC system you were talking about but if you let me know I may have some info.Third option is if you can get into programming mode you may be able to see whats programmed under that button.
Virginian
 
The NEC has a potential to have the Feature/Func key get stuck in a loop.

Use Feature/Func 99 to stop the key from Flashing.

DJ
 
Curlycord THANKS !


FNC 69 FNC worked taking off DND

some phones were marked with incorrect Ext #
set them straight calling and marking with correct
assignments ....users picked phones up and moved
them around and could not understand why the Ext #'s
did not follow them


Pabell
 
What would the procedure be for a single line phone in DND?

Randy
 
Dial 42 to cancel. This should work from the single line phone. This is the default setting. If it does not work then you have to go into programming and look it up CM 1/1/46.
Good Luck
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top