Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DND Fix 3

Status
Not open for further replies.

Highlights

Vendor
Feb 21, 2014
66
US
I'm on version 9.0. Just wanted to double check before I change a user Rights for DND. I added a DND button to the 5410 sets in a User Rights group but it would not work. I check some of the threads and they suggested that I Tick the Enable DND and also change to "Not Part of User Rights". This was a post from 2009, does this sound correct?
 
I'm assuming that the User Rights "Button Programming" tab is set to "Apply User Rights value" and not "No Part of User Rights"?

"Trying is the first step to failure..." - Homer
 
Yes... Enable should toggle, but 54XX can be slippery as they are EOL and do quirky things past about 8.0. I would test it a lot before promising it works.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
 
Thanks, System Status says DND is OFF. I am waiting to hear back from the USERS if the DND is actually working and the DND button is toggling ON and OFF.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top