DN length

[executone]

Can the DN length be 2 digits on 6.0 software?

It says in the program and Install manual 3 to 7, but the program records say 2 to 7.

Have another Tech trying to set one to two and will not let them.

Any ideas?

Thanks,
JJ

 

[Bob904]

Is this for a MICS? If it is, my understanding is they have to be a minimum of 3 digits.

 

[jerryreeve]

I just set up a CICS 6.0 with 2 digits
If I remember the Ver 4 and 5 software manual says 3-7 digits also.....I just checked and yes ver 4 says that the digits (setup) should be 3-7 digits long. This appears to have been a typo from a while back and was never corrected. JerryReeve
Communications Systems Int'l
com-sys.com

 

[executone]

Thanks!!

I just found out that the CICS can be 2 digits but the MICS can only be 3 to 7 digits.

jerryreeve, I believe it is a typo they have never correct also.

Thanks Guys!!
JJ