DN assigned to two (2) TN's

[FGiffone]

This is probably a simple implementation.

TN 20 0 6 12
DN 5458
KEY 00 SCR 5458
KEY 01 SCR 2049

End user has 2nd office, same Option 61c, and would like DN 5458 KEY 00 and 2049 KEY 01 to appear on phone in that office as well on a second TN 4 0 12 13.

How do I replicate a DN KEY 00/KEY 01 on two TN's?

Thank you.

 

[Splic3d]

Just program the new TN the same. If it has Vmail, it can only light 1 phones MW light. Every thing needs to be the same, ie,,hunt, fdn, cls's, ect....

http://www.i3techgroup.com

If its not working, get a bigger hammer!

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx

 

[Firebird Scrambler]

As stated above, but be aware that only one phone will have a "MARP" set against it.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[FGiffone]

Worked as described. For some reason I was expecting it to be much more tedious. Thank you.