Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DLC NT8D02GA with 24 ports???

Status
Not open for further replies.

Buster452

IS-IT--Management
Jul 1, 2005
32
US
Ok, wierd thing. All NT8D02GA digital line cards have 16 ports, right? This one showed 24 as being available with LUVU???

REQ: luvu
TYPE: 2000
TN 28 0 3
TYPE 2000 TN 028 0 03 04 8D VCE
TYPE 2000 TN 028 0 03 05 8D VCE
TYPE 2000 TN 028 0 03 06 8D VCE
TYPE 2000 TN 028 0 03 07 8D VCE
TYPE 2000 TN 028 0 03 08 8D VCE
TYPE 2000 TN 028 0 03 09 8D VCE
TYPE 2000 TN 028 0 03 10 8D VCE
TYPE 2000 TN 028 0 03 11 8D VCE
TYPE 2000 TN 028 0 03 12 8D VCE
TYPE 2000 TN 028 0 03 13 8D VCE
TYPE 2000 TN 028 0 03 14 8D VCE
TYPE 2000 TN 028 0 03 15 8D VCE
TYPE 2000 TN 028 0 03 16 8D VCE
TYPE 2000 TN 028 0 03 17 8D VCE
TYPE 2000 TN 028 0 03 18 8D VCE
TYPE 2000 TN 028 0 03 19 8D VCE
TYPE 2000 TN 028 0 03 20 8D VCE
TYPE 2000 TN 028 0 03 21 8D VCE
TYPE 2000 TN 028 0 03 22 8D VCE
TYPE 2000 TN 028 0 03 23 8D VCE


I even copied a station to it on port 23.
REQ: stat 28 0 3
00 = UNIT 00 = IDLE (2616)
01 = UNIT 01 = IDLE (2616)
02 = UNIT 02 = IDLE (2616)
03 = UNIT 03 = IDLE (2616)
04 = UNIT 04 = UNEQ
05 = UNIT 05 = UNEQ
06 = UNIT 06 = UNEQ
07 = UNIT 07 = UNEQ
08 = UNIT 08 = UNEQ
09 = UNIT 09 = UNEQ
10 = UNIT 10 = UNEQ
11 = UNIT 11 = UNEQ
12 = UNIT 12 = UNEQ
13 = UNIT 13 = UNEQ
14 = UNIT 14 = UNEQ
15 = UNIT 15 = UNEQ
16 = UNIT 16 = UNEQ
17 = UNIT 17 = UNEQ
18 = UNIT 18 = UNEQ
19 = UNIT 19 = UNEQ
20 = UNIT 20 = UNEQ
21 = UNIT 21 = UNEQ
22 = UNIT 22 = UNEQ
23 = UNIT 23 = IDLE (2616)
24 = UNIT 24 = UNEQ
25 = UNIT 25 = UNEQ
26 = UNIT 26 = UNEQ
27 = UNIT 27 = UNEQ
28 = UNIT 28 = UNEQ
29 = UNIT 29 = UNEQ
30 = UNIT 30 = UNEQ
31 = UNIT 31 = UNEQ
 
10 years ago or so nortel came out with a beta trial on 24 port station cards but never made then a general rls due to crosstalk being short of the fed 24 db limit.. i've never saw one but at the time was keeping my fingers crossed with everyone else.. always seems logical to add 25 percent to each card instead of adding new ipe's.. congrats, you've got a rare card, not a babe ruth rookie but seldom seen

john poole
bellsouth business
columbia,sc
 
It has the same part number as my other digital line cards with 16 ports though. Unless they put out Beta's with the same part number as production 16 port cards.

They do list that card as having 16 data ports on it in addition to the 16 digital lines. I could have sworn you weren't permitted to put a station on a data port though.

What's weird though is my other identical dlc's don't report the same way.

I must be a weird stuff magnet. I find all the weird things. I just got to call Xerox yesterday for some faulty programming in one of their big multi-function copiers. They never knew it had that problem.
 
One option would be to do an IDC on the card that shows 24 ports and one that only shows 16. Ask your vendor what the difference is between the two. The cards will have extra data that could be relevant. For example:

Code:
.IDC 6

 => NT8D02GA  07 NNTM60G5PC25 0000  

.IDC 7

 => NT8D02GA  04 NNTM60G1ZB5G 0000  

.IDC 8

 => NT8D02GA  04 NNTM60G1ZB7W 0000

I am not sure if the trailing data would help, but it might lead to an answer, and like John says, you might just be lucky. BTW, did you run cross connect to that "TN" and see if the phone works? It would be the violet/brown pair on your tail cable.

Scott M.
 
we're both wondering about that. does that set actually talk? and your right you can't copy a voice port to a data port. i don't know the part number of the 24 but have talked to a tech that was on the site of the 1st usa trial. i want to say post office KC, Kansas.. let us know if the free ports talk.. i had a wierd one recently, bought several laptops as gifts for my grandkids. three were sent to alabama, to make it short, two wouldn't network, two wireless nic;s with the same mac... way to go dell

john poole
bellsouth business
columbia,sc
 
No such luck. It doesn't work.

Although, it does come in handy for my other problem with two SCR keys setup for a DN that isn't a physical phone. Now I have a 2616 configured on that port and the two lines ring perfect, with the third caller going to vmail.


BTW. IDC doesn't work right as I'm using hyperterm. Weird characters are printed.

Thanks,
Buster
 
if your on 8 none and one on dyper-term, try 7 even and space. sometimes is that software, that's all it takes. bad news is when those sets disu those forwards are also broke

john poole
bellsouth business
columbia,sc
 
It has to do with building the first port on the card as EDLC or XDLC in the CTYP prompt.

XDLC is the default 16 ports
EDLC is the 24 port card

For the sake of correct programming, you should reprogram the card with CTYP = XDLC. Most likely you're being charged for 8 extra spare ports in your maintenance contract.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top