DLC & MLM007 via NITE Key

[SYQUEST]

One of my customers has a Legend R7.0 with MLM007 VMS and a DLC-MLX. They want the AA1 setup for day/nite operation under control of the DLC by the NITE key. I programmed a weekly business schedule for the AA in the MLM007, but I can't seem to find where to program how the DLC controls the traffic - DLC or AA1 with the NITE key in the Legend. I know how to do it with a QCC using the QCC Operator Option: Backup operator station: 770, but where do you program for a DLC?

Also is it possible to access REMOTE ACCESS thru the AutoAttendant? I setup a selector code with selector code action 1 for a direct transfer to 889 and created a Transfer-Only MB with COS 20. But when I call it thru the AA, it rings then ends up at the Console. Any idea if this is possible??

Thanks for any help.

....JIM....

 

[merlinman]

NITE CONTROL:

Put the LINES and the VM Calling group in the DLC's Night Service group.

REMOTE ACCESS:

Build a "LOOP AROUND", that is, take a SINGLE LINE Extension Port and connect it to a vacant Line Port.

Assign REMOTE ACCESS to that line port and assign Transfer Only to the Single Line extension.

 

[SYQUEST]

Both suggestions worked as expected. Thanks for your help.

....JIM....