dividing route

[cuneyt2020]

Hi,
Will it be problem for MD to divide trunks. into two routes?
I mean one md110 side is, Route99 which has 120 trunks the other md110 side is Route99 (60 trunks)+route19 (60 trunks)

Now it works without any problem, i see lots of calls on it. But can it be any problem that i can not assume? Do you advise me to use this?

PS:route19 and route99 are same-defined routes

Site2 Rou19 (60 trunks)
/
Site1:Rou99 (120trunks)>>>>>>-
\
Site2 Rou99 (60 trunks)

Also second question is, what happens when the rou19 and rou99 are defined with different parameters
Why i need this configuration is, to use different nutri to the same route, so that number conversion is possible for the same trunk group

Rgrds.

 

[patcher]

I think you will have a problem in QSIG if you do this. Route opti will not work on 2 different route, maybe....But for public ISDN, no worries. Be sure you programmed dest choices correctly.