Div. on no reply as chain

[HIREI]

Hi, all!

We have BC9, and CDIDP:
DIR---DIV
1000--1001 it works on no reply
1001--1005 it's not, i.e.:

We call 1000, phone rings, no answer, after a while calls rerouted to 1001, phone rings, no answer, but, after a while call is not rerouted to phone 1005. How can we solve the problem?

Any means?

Thanks.

 

[parnum]

check aspac 192, long time since bc9 but memory is saying there is a patch???

best parnum

 

[HIREI]

May be, so in our BC9 CNI76 parnum ends by 190.

 

[dstrang1]

There is a patch for chained diversion in BC9. The US version is C88000.

I dunno if someone can cross-reference the info below to an aapropriate version for you system.

Here's the header info:
/*======================================================================*/
/* ERICSSON FAULT REPORT FORM (Rev. 9) Exported from TACOS */
/*======================================================================*/
/* TaskId.FR.No : 88000 Originator : ebuspe */
/* Date.Created : 2000-05-31 Created.By : ebuspe */
/* Cust.Rep.No : US-1283 Priority : 3 */
/*----------------------------------------------------------------------*/
/* Product.No : Revision : */
/* Unit : Block : RM */
/* System.1 : ASB50104 Sys.Release : R6 */
/* System.2 : ACS Subsystem : TCS */
/* BC.Release : 9.0 SES.Release : */
/* Category : Feature : VSF/DIV */
/*----------------------------------------------------------------------*/
/* AD.Identity : Team.No : */
/* Mod.Release : CNI.No : */
/* FRB.Meeting : Short.Answer: */
/*----------------------------------------------------------------------*/
/* Fault.Type : SDP Fault.Phase : SUS */
/* Fault.Area : MD1/NA/US Status : UNF */
/* Resp.Person : */
/*----------------------------------------------------------------------*/
/* Relation Task Id (FR Number) : */
/* Relations to other FR's */
/* RC 62158 */
/* CN 62157 */
/* CN 62159 */
/* CN 62304 */
/* Relations from other FR's */
/* RB 62158 */
/* CN 62157 */
/* CN 62159 */
/* CN 62304 */
/*----------------------------------------------------------------------*/
/* Short.Descr : Multi-Diversion patch for US market */
/*----------------------------------------------------------------------*/
/* Fault.Descr.And.Explanation : */
/* *** U.S. Application Only *** */
/* */
/* Replaces FR 62158 which causes unscreened tranfers to fail due to */
/* unset record variables which are used later in signals to CM. */

Good luck,

Dave Strang

 

[HIREI]

Thanks for info about the patch!

 

[whosrdaddy]

multiple diversion is a payable patch package...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[HIREI]

For No reply, FME, On Busy and only for BC9 ? People says PE command group solves the problem, but PE is available only from BC10.

 

[dstrang1]

HIREI (TechnicalUser) 21 Sep 07 11:37 Say-eth
>For No reply, FME, On Busy and only for BC9 ? People >says PE command group solves the problem, but PE is >available only from BC10.


That's the indirect way of saying "an upgrade will fix your problem