DISTINCTIVE RINGING

[nortic]

I'm looking to set up distinctive ringing on tie lines from another node , I have pakage for new distinctive ringing but it does not set up as noted in the ntp's , have no info on the ringing cadence table,has anyone used this before?

thanks, nortic

 

[nortic]

UPDATE
I HAVE PKG 74 DRNG AND 125 FTC , I DO NOT HAVE PKG 185
NORTIC

 

[nortic]

good news , I found the answer to this riddle.

thanks

 

[cmawbey]

post you findings.. it may help someone else with the same problem

Colin

 

[nortic]

Colin, your right,
I had intended to, had to clear some tickets before I could jump back online.
WILL POST AS FAQ ALSO

here is what I found:

DISTINCTIVE RING FAQ: 10/03/03

I FOUND THE NTP'S TO BE VERY CONFUSSING

REL 25.40
PACKAGES 74,DRNG AND 125,FTC

NOT USING PKG 185

REFER TO NTP ADMIN LD 56,

1)SELECT YOUR CADANCE FROM MACD MASTER CADANCE TABLE
AND ENTER AT THE NDR2 PBX PROMPT(SEE BELOW)
DEFAULT RING CADANCE FOR INTERNAL IS 1
DEFAULT RING CADANCE FOR DRNG IS 2(THIS IS TO SHORT
AND TO QUICK, ALMOST CONSTANT)
I USED CADANCE 4 WHICH IS A GOOD DOUBLE RING
AND SEEMS TO WORK WELL WITH FAX MACHINES

2) SET YOUR RDB LD 16 FOR:
DRNG =YES (DISTINCTIVE RING)
NDRI =2 (NETWORK DISTINCTIVE RING INDEX)

TEST ALL TYPES OF CALLS INTERNAL AND EXTERNAL
FOR PROPER OPERATION.

WARNING: DO NOT MOTIFY MASTER CADANCE TABLE
ENTRIES AS THEY AFFECT ALL TONES AND RINGS

LD 56 FTC

REQ prt
TYPE ftc
TABL 0
USER

TYPE FTC
TABL 0
NCAD 001
NBCS
XTON 002
DCAD 002
DBCS
XTON 002
ICAD 005
IBCS
XTON 002
RCAD 001
RBCS
XTON 002
GCAD 001
GBCS
XTON 002
HCAD 003
HBCS
XTON 002
PCAD 001
PBCS
XTON 000
XCAD 000
NDR1 PBX 002 (LEAVE THIS AS IS)DEFAULT DRNG (QIUCK ALMOST CONSTANT)
NDR1 BCS
XTON 002
XCAD 002
NDR2 PBX 002 (CHANGE TO 4)THIS ENTRY IS FOR 500 AND DIGITAL
NDR2 BCS
XTON 002
XCAD 002
NDR3 PBX 002 (FUTURE-USE FOR ANOTHER RT)
NDR3 BCS
XTON 002
XCAD 002
NDR4 PBX 002 (FUTURE-USE FOR ANOTHER RT)
NDR4 BCS
XTON 002
XCAD 002

NOT SHOWING ALL OF PRINT (TO LONG)

HOPE THIS SAVES SOME TIME,



NORTIC