Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
distinctive ring
- Thread starter coniglio
- Start date
acewarlock
Technical User
Page 1336 of 3156 Distinctive Ringing by DN
553-3001-306 Standard 10.00 January 2002
A sub prompt for every DN key configures distinctive ringing index for
incoming and outgoing calls. There are two available features for incoming
and outgoing calls:
• Distinctive Ringing by call source, per DN-key: The distinctive
ringing given to the called set is determined by the call source (calling
set). This functionality is the same as the EDRG feature, except it is DNkey
based rather than set based
• Distinctive Ringing by call destination, per DN-key: The distinctive
ringing given to the called set is determined by the call destination (called
set) and is also based on the DN-key of the called set.
With these enhancements, a DN-key can be configured to give a distinctive
ring to the terminating set, and receive a distinctive ring for incoming calls.
Operating parameters
The precedence order for the different distinctive ringing cadences to ring the
terminating set in a call is:
• Distinctive Ringing for an Incoming trunk call
• Distinctive Ringing by DN by call source
• Executive Ringing by DN call destination
• Distinctive Ringing by DN by call destination
The Private Line Ringing (PVR)/ Non-Ringing (PVN) keys are not supported
by the DRDN features.
No DRDN functionality is supported on the Voice Call (VCC) keys since no
DN is assigned to a VCC key.
The QPC609D Fast Tone and Digit Switch card, or a later version of this card,
is required to implement the New Distinctive Ringing feature.
A total of five distinctive ringing cadences used by DRDN are supported.
Therefore a set with more than five DNs will have at least two DN-keys with
the same distinctive ringing cadences.
553-3001-306 Standard 10.00 January 2002
A sub prompt for every DN key configures distinctive ringing index for
incoming and outgoing calls. There are two available features for incoming
and outgoing calls:
• Distinctive Ringing by call source, per DN-key: The distinctive
ringing given to the called set is determined by the call source (calling
set). This functionality is the same as the EDRG feature, except it is DNkey
based rather than set based
• Distinctive Ringing by call destination, per DN-key: The distinctive
ringing given to the called set is determined by the call destination (called
set) and is also based on the DN-key of the called set.
With these enhancements, a DN-key can be configured to give a distinctive
ring to the terminating set, and receive a distinctive ring for incoming calls.
Operating parameters
The precedence order for the different distinctive ringing cadences to ring the
terminating set in a call is:
• Distinctive Ringing for an Incoming trunk call
• Distinctive Ringing by DN by call source
• Executive Ringing by DN call destination
• Distinctive Ringing by DN by call destination
The Private Line Ringing (PVR)/ Non-Ringing (PVN) keys are not supported
by the DRDN features.
No DRDN functionality is supported on the Voice Call (VCC) keys since no
DN is assigned to a VCC key.
The QPC609D Fast Tone and Digit Switch card, or a later version of this card,
is required to implement the New Distinctive Ringing feature.
A total of five distinctive ringing cadences used by DRDN are supported.
Therefore a set with more than five DNs will have at least two DN-keys with
the same distinctive ringing cadences.
- Thread starter
- #3
acewarlock
Technical User
- Thread starter
- #5
- Thread starter
- #6
- Status
Similar threads
- Locked
- Question
- Locked
- Question