I am using asterisk@home 2.8 beta. I have one PSTN line coming in on a X100P with 2 telephone numbers one of which is on a distinctive ring. I also have a VOIP for incoming on another trunk. What I am trying to do is get the 3 different incoming numbers to go to 3 different extensions and voicemail. I have already figured out the distinctive ring part with this in the zapata.conf
sedistinctiveringdetection=yes
dring1=375,339,133
dring1context=ministry
The logs tell me it is recognizing the "ministry" context. I just don't know where to put the "ministry" context and what to put it in it to route these calls to a seperate extension. Nor do I know how to split the VOIP incoming from the PSTN incoming. They both seem to be using the "from-pstn" context.
Any help would be appreciated
sedistinctiveringdetection=yes
dring1=375,339,133
dring1context=ministry
The logs tell me it is recognizing the "ministry" context. I just don't know where to put the "ministry" context and what to put it in it to route these calls to a seperate extension. Nor do I know how to split the VOIP incoming from the PSTN incoming. They both seem to be using the "from-pstn" context.
Any help would be appreciated