Display outgoing number on Merlin Magix

[randruckow]

I was wondering what program changes I need to make to display users number to the receiving end when they call out. I have a system with a PRI and I presently have the option of number to send set to base plus extension. My numbers are in the 717 xxxx
range. Any help would be appreciated.

 

[SYQUEST]

That is the option to use, if you want the DID number to be the outgoing CID. But remember that will be used for ALL stations' outgoing calls, whether they have DID numbers or not! That is the short coming of the Avaya software on the Legend/Magix when using PRIMARY ISDN. Unfortunately, Avaya never finished the software to work correctly for CID flexibility when the switches are equipped with PRIMARY ISDN.

....JIM....

 

[merlinman]

Actually, my experience (at least with one Service Provider) was that unless the extension had a D-I-D, it couldn't call out when caller ID was set to send Base + Extn.

http://home.comcast.net/~merlinman