Display on 2616 with multiple DNs

[FlyingDevilFish]

I have a 2616 on an 11c with multiple DNs on Keys 0,1 and 2. All 3 DNS are MARPED to this phone. Problem: incoming internal calls to the DNs on Keys 1 and 2 do not display the callers DN or name, BUT it does display when the DN on key 0 is called. Any suggestions or help appreciated.

 

[phonejack99]

Chg CLS to TDD

 

[wolfi24]

Yes , I agree with phonejack , put TDD in cls

Wolfi

 

[FlyingDevilFish]

Thanks for the reply Jack. I get a SCH0345 when i input CLS TDD. Here is the CLS of the station.

CLS CTD FBA WTA LPR PUD MTD FNA HTA ADD HFA
MWA AAD IMD XHD IRA NID OLA VCE DRG1
POD DSX VMD CMSD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID
ICDD CDMD MCTD CLBD AUTU
GPUD DPUD DNDD CFXD ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID
DDGA NAMA
USRD ULAD RTDD OCBD FLXD

 

[phonejack99]

Are you sure about that sch message number?

 

[FlyingDevilFish]

Yes, here is the what I did.


REQ: chg
TYPE: 2616
TN 15 0 0 0
SCH0120
TN 15 0 0 0
ECHG yes
ITEM cls TDD
SCH0345
ITEM

Herer is the release:

VERSION 2111
RELEASE 22
ISSUE 46 +

I see in another thread that TDD is only available in RLS 23 or higher. Any ideas? Thanks for any help in advance

 

[1brc]

You may need to put dnda in cls before tdd will go in.

 

[fritzthecat]

Hello folks,
you need to have Rel 23 on your system to have the TDD featur available
Regards
Fritz
(NNCSS Voice)