Hi,<br><br>I'm kinda new to Sun and i've fallen into a problem right away. I've plugged in a SCSI Adaptor AHA-2944UW/OF and when i restarted the machine i lost my display. the machine being a SUN Ultra 10. i had nothing attached to the SCSI adaptor when i turned on the machine.<br><br>Where have i gone wrong and how can i fix it.<br><br>Any help much appreciated...<br><br>DTPerks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Display lost once i slot in a PCI SCSI Adaptor
- Thread starter dtperks
- Start date
Do you lose the display at the boot ptompt or only after Solaris starts to boot? If you can get to the boot prompt you can try typing probe-scsi-all (or it maybe scsi-probe-all, I never can remember until it tells me I typo'd) this will go out and test for your SCSI adaptor to see if it is functioning correclty, I assume that when you remove the SCSI card everything comes back as expected? Are there any message in the log are does it not get up that far?
- Status
Similar threads
- Locked
- Question