Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Display analog station on a media-gateway card 3
- Thread starter Joledur09
- Start date
-
2
- #2
- Thread starter
- #3
-
1
- #4
AvayaTier3
Technical User
ASA use Advanced tab, Emulation
Command: list station port 1v2
the output will be numerical station list for ports on media-gateway 1 slot v2
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
44 years Bell, AT&T, Lucent, Avaya
Tier 3 for 34 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
Command: list station port 1v2
the output will be numerical station list for ports on media-gateway 1 slot v2
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
44 years Bell, AT&T, Lucent, Avaya
Tier 3 for 34 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
avayatech2018
Technical User
I did this just today. In ASA Fault & Performance tab. Hardware Manager. Find the gateway and the card and right click on the card. Click on Port Usage.
- Status
Similar threads
- Question
- Locked
- Question