Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dispalyed number in internal calls

Status
Not open for further replies.

Stefanq

Technical User
Feb 25, 2008
15
JO
Hi,
I have TSWSP5 running in a site...
the extension series are 100&&999
They have also DID numbers with the range 0912100-0912199
DID and DOD works fine...

for example extension 100 has DID 0912100 and DOD 0912100.
extension 101 has DID 0912101 and DOD 0912101.

My question if I call inetranlly from ext.100 to exte 101 I need the number to be displayed on 101 display is 0912100..I need that the DOD number appears even on the internal calls...I tried
NUTRI:ENTRY=100,TRC=3,PRE=0912100,CNVTYP=1,NUMTYP=10; but this works only for external calls not for internal calls.

is there any advice??


 
not possible in a simple way. this can be done by implementing an internal ISDN loop, but this means users have to call the whole number (ie 0912100).

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Thanks daddy,, its okay this works fine.
one more question on the same topic:
Is it poosible to program 7 digits extension number ??Is there any patch for this solution?
 
no, this limit is by design.

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top