disk

[Guest_imported]

Hello,

I have a station Sun platform Sparc with scsi card and a raid card and 6 disks.
the problem is that i want to install raid but disks don't appear , the system show only one disk. .
when i tape
OK test-all testing /SUNW,ffb@1e,0
testing /pci@f,4000/scsi@3,1
no target found
selfset failed, return code = -1
testing /pci@1,f,4000/scsi@3....
when i tape
ok probe-scsi-all , it show
one disk ,one cdrom .
Where is the problem ?

 

[KenCunningham]

Have you tried boot -r from the OK prompt? This should boot and discover any new disks it finds on the way up. HTH.

 

[maunir]

while boot -r works for everything to discover new devices installed....you could also do drvconfig and then disks for 2.6 and 2.7..for 2.8 type in boot -r or devfsadm