You did not provide much information about what type of storage you have on your server, but the short answer is that you can go to Monitor - Storage Devices. Identify the device on which your hdd's are attached and that will define your total available hdd space. For more definitive information you would use nwconfig.
It's hard to say on hard drives rather on volumes, Maybe you have one volume accros several hard drive or multiple volumes on one hard drive, but you can go to Monitor > Volumes and see how many you have your data on volumes or from workstation run nwadmin32, choice details of volume and see statitics.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.